Availability: In stock

Only 2 in stock. Hurry up, buy it now!

Limited Edition PinBall Display clock based on panaplex display module, which has been used in Pinball game machines.

Please go to the clock page to read more about this clock and its design concept. 
Please use the Menu on the left to find out more about this rare clock.



Key  features:  
  • Unique 6 digits Nixie Clock on the market !
  • Fully assembled and tested Nixie Clock
  • 5 levels display brightness
  • Based on rare  PinBall Display
  • Displays Time, 2 Alarm clock sets and Date
  • Accurate & calibrated time clock source from internal crystal
  • Integrated 2 Alarm Clocks
  • Easy control with only 2 buttons or via serial interface
  • Uses standard 9V or 12V wall plug Power Supply
  • Internal backup battery for power failure protection
  • Will generate alarm buzz even main power is off !!!
  • Precision Seconds setup
  • Internal buzzer for Alarm1 and Alarm2
  • Separate Alarm1 and Alarm2 trigger outputs
  • High efficiency integrated on board DC-DC converter



2 Main Modes: Display Mode and Setup mode

Display mode: In the display Mode Clock indicates the following information:

Time in format  HHMMSS , where HH are Hours (00-12 or 00-23), MM is Minutes (00-59), SS is for Seconds (00-59) Alarm1 in format HHMM 1, 1 indicates Alarm1 , where HH is Hours (00-12 or 00-23), MM is Minutes (00-59) Alarm2 in format HHMM 2,  2 indicates Alarm2 , where HH is for Hours (00-12 or 00-23), MM is for Minutes (00-59), SS is for Seconds (00-59) Date in format :    DDMMYY where DD is for Day (1-31), MM is for Month(1-12), YY is for Year (00-99) Setup Mode: Setup mode is for changing configurable parameters, allowing:
Set current Time Set Alarm1 time, switch it on/off Set Alarm2 time, switch it on/off Set Date Set 12 or 24 Time Display mode

Newly designed PinBall Display Nixie Clock for your attention !
  • Newly designed SIX digits Nixie tube Clock - just on the market  now!
  • Based on peace of history - PinBall Display, which has been used in PinBall  game machines.
  • Optimal compact, thin design allows to use this clock  as desktop clock  at home or small office environment
  • Reliable, simple to connect and easy to use Clock!
  • High efficiency and low power consumption for energy saving
  • Convenient Time and Date display reading
  • External alarm outputs give you chance to control a wide range external devices ( power control circuit is required)
  • Easy control with only 2 buttons ( no remote control is required)
  • Over current and mixed polarity protection.
  • Leap Year automatic date calculation
  • Easy replacable backup battery


Specification & recommendation
  • It's fully assembled working  6 digits  PinBall display clock, giving you chance to concentrate your efforts on the case design! Please send me your complete Clock picture, as I am going to create picture gallery on my WEB page.
  • Clock works  from 9 to 12V DC, but 12V DC supply is recommended.
  • Power consumption: 3.72W (310mA@12V) from wall plug power supply (all digits to display) 2.3mW (0.75mA@3V) from backup battery ( 3V CR2032).
  • To keep power consumption at low level, do not connect load <100KOhm to the external alarm contact.
  • Internal buzzer generates simple one tone and  pause sound in Alarm1 or Alarm2 events. It will last for 1 minute, but could be shut off by pressing the button.
  • External alarm contacts set logical "1" ( about 4.5V DC) in the alarm event and gives you extra feature allowing to connect quality sound melody generator or any external  modules via appropriate converter or power control circuit (not included in this sale)
  • Frequency Test Mode can be activated to easily check and adjust clock frequency. In this mode Clock does not display or keep time and date, for 3 seconds it  displays 200000, which means  200KHz, than display switches off and  frequency check signal  is activated on the dedicated output pin. Use it to check it, if you have calibrated precision frequency meter or use this signal for your calibration purposes.
  • 1 year full warranty.
  • Digit height  - 18mm
  • PCB board size  - 97x155mm
  • 7 digits Pinball Display clock, including 7 digits panaplex display and  button tips   - 155x97x65mm
Latest Documentation
  • Please feel free to ask me any questions regarding this Clock. I'll do my best to respond to you within 12 hours.
  • Your design or new function suggestions, improvement are very welcome and will be considered ASAP.
Notice & warning
  • This clock is designed for inside use only. Do not use this Clock outdoor under any circumstances.
  • Some internal components are under High Voltage, before handling or maintenance work, be sure that it's switched off.
  • I do not accept any liability  may cause during improper or careless use of this Clock.
  • Due to high voltage on the board, do not use this clock in bathroom, under rain or in the wet and/or dusty conditions.
  • Due to constant improvement, your clock could be slightly different from the described above or shown on the pictures, but technical parameters and functionality will be the same or better than stated above.
For your information
  • Please look at my other items, which I developed for you!
  • Please add my WEB site to your favourites list, as more items will  come  soon.
  • Next product in my Clock line is ...
  • Digital electronics design is my speciality. Please feel free to contact me if you have an idea you want to discuss or if you need to develop electronic device.
When you buy it, following items are included/excluded from this sale:
  • Fully assembled and calibrated  6 digits  PinBall display clock. To make Clock functional, Power Adapter is required. No power supply is included in this sale. Power Supply  is available at extra £7-00 GBP for UK, Europe or USA Customers only.
  • Internal synch clock will be calibrated to get the best time accuracy.
  • User Manual with detail description how to control your Nixie Clock is freely available to download from our web site
  • 1 Year full warranty.
  • First Class Signed For Royal Mail delivery. Just small extra delivery charge to post it to Europe or to the USA, Canada.
  • Your Clock will be fully tested, calibrated and well packed  before I dispatched to you.
  • Usually we dispatch your Clock within 2 working working day after we receive your payment.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.